Chrysler Repair: 95 sebring wont start: code 42, obd ii scan tool, crank sensor

Question
1995 sebring quit while driving --no spark and codes 12 & 42. bought obd 1&2 and cant find obd1 data link connector since the obd2 plug under the dash dont work apperently there is one under hood but cant find... think it is crank position sensor because fuel pump can be heard--- please help also have no spark ... THANKS in advance

Answer
Hi John,
According to my '95 Sebring manual, there is an OBD-II plug under the dash by the steering column. There is no OBD-I plug anywhere in the vehicle.
The 42 code seems to pertain to the ASD relay's output to the PCM not being present/ignition coil primary circuit (depending upon whether you got the 42 code from the MIL light or the OBD-II scan tool. Which was it?). The crank sensor code is 11 via the MIL or 40 via the scan tool. So check it again both ways and let me know and we'll go from there.
Roland