Chrysler Repair: chrsyler pacifica 2005, halogen lamp, rubber boots

Question
do you know how to change the low beam light bulb in a 2005 chyrsler pacifica?  thank you

Answer
REMOVAL
HALOGEN HEADLAMP
Remove the headlamp unit (Refer to 8 - ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - REMOVAL).
Disconnect the lamp electrical connector (HALOGEN LAMP FROM CONNECTOR).
Remove the rubber boots/seals protecting the lamp from the elements.
Twist lamp socket out of headlamp housing

REMOVAL
Open hood, disconnect and isolate the battery negative cable.
Remove the two headlamp unit retaining screws (HEADLAMP UNIT MOUNTING - REMOVE/INSTALL).
Gently pull headlamp unit forward, unsnapping it from the lower retaining clip (HEADLAMP UNIT LOWER ATTACHMENT). Be careful not to damage lower retaining clip upon removal.
Disconnect the headlamp unit electrical connector (HEADLAMP UNIT LOWER ATTACHMENT).
Transfer the lamps to the new headlamp unit if replacing.