Chrysler Repair: Replacement of headlight, 300m, signal lamps, hood latch

Question
I need to replae the headlight assemblies in a 2000 300M. How do you remove/replace these?

Answer

HEADLAMP HOUSING - INTREPID
Headlamp lens fogging is a normal condition and does not require service unless excessive or continual. Moisture will vent from tubes or vents located on the back of the lamp.

REMOVAL
Release hood latch and open hood.
Remove jackscrews attaching headlamp to body Headlamp Housing - Intrepid
Remove headlamp from body.
Disconnect wire connector from headlamp and parking, side marker, and turn signal lamps.
Remove headlamp housing from vehicle.
INSTALLATION
Place headlamp housing in position on vehicle.
Connect wire connectors to headlamp, parking, side marker, and turn signal lamps.
Place headlamp in position on body.
Install screws to attach headlamp to body.
Verify headlamp operation and alignment.