Classic/Antique Car Repair: 1957 chevy axle removal, c clamps, brake components

Question
how do I get the axles out.I have removed the rearend and all brake components I have removed all nuts holding the center section in place. it is an original rear  

Answer
Steve
HI there should be 4 bolts holding the axles in  on the ends of the banjo. the new ones have a pin  or 2 small c clamps on the inside of the rear if you push the axel in you can take the c out but you might need or have to rent a axle puller after you remove the bolts that hold the axles in. you have 4 bolts holding in yours