Dodge Repair: washer pump, lbs torque, battery removal

Question
I own a 96 dodge intrepid 3.3L and i do not hear any noise when i try to use the washer fluid.Can you tell me how to replace the washer pump. Thanks

Answer
WASHER RESERVOIRS
REMOVAL
Disconnect the battery terminals. Remove battery and battery tray Battery Removal
Remove two reservoir retaining nuts and screw then remove reservoir Reservoir Removal
Disconnect the wire connector from the reservoir pump and float sensor.
Disconnect the washer hose and block the liquid outlet to prevent the liquid from running out of the reservoir.
INSTALLATION
Connect washer hose and install the reservoir.
Connect the wire connectors.
Install reservoir retaining nuts and screw. Tighten to 9 to 14 N·m (80 to 124 in. lbs.) torque.
Install battery tray and battery. Connect battery terminals.