Motorcycle Repair: 1995 FLSTF, flstf, best bet

Question
Front brakes do not work.  Tried Bleeding and some of your other ideas and did not work.  Took master cylinder apart...need picture of instructions on how to put back together, plus when it was together, there was no pressure at all.  Any suggestions?

Answer
You might either have a bad master cylinder or the puck is stuck in the caliber.
I would put the master cylinder back together and remove the caliber and remove the puck and check it. Remove all the brake fluid and install fresh.
I dont have anyway to send pics in this forum. Your best bet is to get a service manual. It will have pics in it.
Good luck and happy riding
Mike