Motorcycle Repair: front brakes, master cylinder, caliper

Question
i have a 1994 fatboy i recently rebuilt my master cylinder and started to bleed my brakes at first i got a little fluid out the bleed valve then nothing i blead them for a while and it seems as though I'm not building pressure

Answer
Try starting at the master cylinder,Pump the lever as if you were bleeding the caliper but instead loosen the line on the master cylinder you should get some air,if not i believe there is a splitter for the lines,that can also be bled the same.When you are sure there is no more air in the line you can go to the cailper.Always protect your paint and chrome and never run out of fluid when you are trying to bleed the system.