Small Engines (Lawn Mowers, etc.): Poulan chain saw idle set screw tool, torx head screws, screw tool

Question
Just discovered the Model P3314 Poulan chain saw I have requires some sort of special tool to adjust the idle set screw, even though the instruction manual talks about resetting it. Poulan.com was no help at all.  Wouldn't even tell me what kind of tool was needed.  Can you help?

Answer
Hello Ken:

>>Usually a "15 Male Torx" is Used to Set the Idle on the Newer Saws.
>>If the Saw has Air Mixture Screws, there is Usually a Plastic Cap that has to be Carefully Broken Off the Adjuster Head before it can be Turned. These Also are Torx Head Screws.
>>Please, Do Not Hesitate, If you Hit a Snag, if I Missed Something or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John