Small Engines (Lawn Mowers, etc.): Lawnmower carburetor, briggs stratton corporation, briggs stratton


Question
QUESTION: I have an old 2 stroke victa with a plastic carb I think is called a G4 carburetor.  I have pulled it apart and there are 2 wires that are supposed to go back inside for the cut off but I am not sure how to put them back in as they were not in the carby when I got the mower.  Can you please advise me how to install them or send a diagram on the carby please

ANSWER: Hello Trevor:

>>Send me the Model Numbers Off the Engine, Please. With these I can Locate the Correct Manual and Better Assist you.
>>Thanks.

Respectfully

John

>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John

---------- FOLLOW-UP ----------

QUESTION: Dear John..Thank you for replying so quickly the items I could find are as follows: Victa model AE055AA90 also on the motor and chasis 08092 and EN72804(Z or 2) and about an inch past that CC.  Hope this is enough to assist

Answer
Hello Again Trevor:

>>Here is Some Information I though you should Know.
>>In June 2008 Victa Lawncare was sold to Briggs & Stratton Australia Pty. Ltd., part of the U.S. based Briggs & Stratton Corporation, the World’s Largest Small Engine Manufacturer and Major Supplier of Engines to Victa. The Vast Majority of Victa’s mower Products continue to be Manufactured at the Company’s Moorebank NSW Head Office.
>>Briggs is in the Process of Incorporating the Service/Shop Manuals into their System.
>>The Last 2 Cycle Victa I Performed Maintenance on Did Not have the Wires you have. It was Shut Off Using the a Solenoid that Screwed in from the Bottom and Closed Off Fuel to the Jet.
>>Please, Do Not Hesitate, If you Hit a Snag, if I Missed Something or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John