Small Engines (Lawn Mowers, etc.): john deere LA115, jumper wire, jumper cable

Question
3month old lawnmower will not start, it will not even turn over. battery charge is fine.

Answer
Hello Jason:

You can View a Breakdown/IPL of the Engine and Mower at this Site Addy, http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.H... and Enter the Model Numbers LA115 and Click Find. Then Select your Model from the Search Results Area. Then Select the Sectional File. Then Select the Section of the Mower you Wish to View Online. Lets Do Some Diagnostics. 1- Check the Fuse. 2- The Following is an Instruction File for the Safety Switch System. Any Input is Appreciated. The Color Code of the Wires May be Different than those I Use as a Reference in the Instruction File. **PLEASE REMEMBER THAT THE INSTRUCTIONS FOR CHECKING THE SAFETY SWITCHES IS JUST THAT!!! FOR CHECKING ONLY. I NEVER Suggest a Mower be Operated with a Safety Device or Switch Disconnected or Bypassed. Now. On Some Model Mowers you can Simply Unplug the Safety Switch from the Harness. On Other Models you have to Place a Jumper Wire Between the Harness Terminals (on the 4 Post Switch (Clutch/Brake) Jumper from Same Color Wire white to White First and then Check for Fire, Now Include the Black to Black Wires if No Fire. Check the Clutch/Brake and the Blade/PTO Safety Switches First. Check the Seat Safety Last. Usually the Seat Safety is Not in the System for Starting the Engine. Just to Ensure Someone is in the Seat when Engaging the Transaxle and/or Blades. Use a Paper Clip or a Short Wire to Make a Jumper.**  3- The Following is an Instruction File I Made for Checking/Testing the Starter and Solenoid. **(with the Spark Plug/s Removed) To Check the Solenoid and Starter, Once you are Sure the Battery is Fully Charged/New, then Use your Jumper Cable Set and Attach the Positive Lead Onto the Positive Post of the Battery (make sure the Battery is Fully Charged or is a New Battery). Now Firmly Touch the Large Post on the Starter. If the Starter Does Not Turn and you can turn the Engine by Hand, then the Starter is Bad. If the Starter Turns the Engine Properly, Then Check the Solenoid. Firmly Touch the Small Post at the Base of the Solenoid that has the Ign Wire Attached to it. If The Starter Does Not Turn and the Solenoid Clicks, Then the Solenoid is Bad.** If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. Have a Happy Holiday Season and May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John