Small Engines (Lawn Mowers, etc.): Troy-Bilt PTO Belt Loose, pto belt, manual deck

Question
I have a Troy-Bilt Model 609 Lawn Tractor (Model 13AQ609G063) (S/N 1B150H20001) with a 42-inch PTO manual deck.  I installed a new P/N 754-0485.  The PTO Belt is extremely loose after I install it.  I have made sure it loop correctly.  When I engage the PTO and let it run for a minute and shut down, the PTO pulley gets hot, so concern I will burn the belt.  This mowing deck has pulley brakes on each mower blade drive and have made sure they are released when the PTO is engaged.  Is there a way to adjust the belt tension on this tractor?

Answer
Hello Brett:

Go to this Site Addy, http://www.jackssmallengines.net/parts.asp and Select Shop Online Parts Look Up. Then Select the Model Tab and Enter the OEM (Troy Bilt)and the Model Numbers (13AQ609G063). Now Double Click on your Model in the Results Area. I am Using this Breakdown for Reference. Are the 2 Extension Springs (#s 58 & 68) Still Attached to the PTO Engagement Plate? These Springs Hold Tension on the Belt so the Belt is Not Loose. Is the Plate Moving Freely? If No, then Remove, Clean and Lightly Lubricate the Pivot Bolt/s. Please, Do Not Hesitate, If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John