Small Engines (Lawn Mowers, etc.): ryobi 725r clutch removal, clutch assembly, torx
QuestionThe pull rope broke and I can't get to the pulley with out removing the clutch assembly...problem is I can't get the thing off!!! Please help.
Thanks
Ed
AnswerHello Ed:
There is a Small Torx Head Screw Inside the Nose of the Clutch Bell/Drum (where the Cable or Shaft Insertss Into the Cluthc Bell/Drum. Remove the Screw and the Drum/Bell will then Slide Off. If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John