Dodge Repair: A/C and wiper lights flashing on start up, slide pots, calibration test

Question
10/8/2007 there was a question regarding flashing A/C lights as well as rear wiper/washer.  I have this problem as well and your answer did not really tell me how to stop the flashing only a diagnostic test that I don't see relevant. do you have a different solution?  Below is your first answer.

CALIBRATION/DIAGNOSTICS TEST ENTRY
TO INITIATE TESTS:
Set Blower motor ON HIGH
Set Mode position to Panel
Open all A/C outlets
Set Temperature to Cold (Both slide pots if equipped)
Depress WASH and REAR WIPER button simultaneously for 5 Seconds (Until all LED's light)
RESULTS:
All LED's will turn on for 5 Seconds
Calibration Test is running when REAR WIPER and INTERMITTENT are alternately flashing. Cooldown test is running if A/C and RECIRC are alternately flashing.
Acceptable results is REAR WIPER LED is the only LED flashing. Push Rear Wiper to exit.
After all tests have passed, Calibration Diagnostics and Cooldown can be run separately.  

I din't see how this answered the question.

Answer
have u even tried to perform this test?  What the above mentioned test is to recalibrate the doors and check for errors and codes.
When the lights are flashing that means it has lost its calibration and needs to be re done  aka perform the test that I posted.