Small Engines (Lawn Mowers, etc.): Drive belt, model numbers, pulleys

Question
I have a 8 hp Troy Built horse. I Put a new belt on and it is all ready worn out.  I have set it by the book. Is there any other adjustments that I can do.  I really like the old Troy Built.

Answer
Hello Terry:

Send me the Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you. It Sounds like a Idler Pulley May be Bad or a Belt Guard is Set Wrong and is Rubbing the Belt. Check the Pulleys and Make Sure they are Not Pitted or Rough. If Any of the Pulleys are Rough or Pitted where the Belt Rides, this will Cause Premature Belt Wear. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John