Small Engines (Lawn Mowers, etc.): Craftsman snowblower spiral assembly removal, craftsman snowblower, gear assembly

Question
Please forgive me if this is not the proper area for my question, but I recently
bent the right spiral assemby blade on my snowblower, and I can't figure out
how to remove it so I can either fix it or replace it. I seperated the gear
assembly but it still will not allow me to remove the blades. I noticed there
are 2 spiral pins holding the gear assembly to the rest of the machine,
making me think that if I removed them I could pull everything out, but I can't
seem to get the spiral pins to budge. Should they? And am I on the right
track?

Answer
Hello Matt:

I Believe you are Correct About the Roll Pins. However, Send me the Model Numbers Off the Snow Thrower, Please. With these I can Locate the Proper Manual and Better Assist you. Thanks.

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John