Small Engines (Lawn Mowers, etc.): SMALL ENGINE, throttle linkage, type numbers

Question
i FIGURED OUT WHY I COULD NOT UNDERSTAND ABT WHERE LINKAGE WENT. I WENT OVER PAST INFO & REALIZED IAM MISSING A SPRING. CAN YOU TELL ME WHERE THIS SPRING ATTACHES TOO. THANKX MIKE

Answer
Hi Mike:

The Only Spring Other than the Spring Wrapped Around the Throttle Linkage is the Governor Spring. The Governor Spring Hooks to the Throttle Pivot and to the Lower Hole in the Governor Arm. When the Pivot Moves it Pulls the Spring which Pulls the Governor Arm and the Governor is Connected to the Carburetor by the Link. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John

Hi Again Mike:

You can Purchase the Governor Spring from your Local Small Engine Service Center or Online from Outdoor Distributors @ 1-877-707-2787. Be Sure to have your Engine Model and Type Numbers with you when Purchasing the Spring. Thanks for the Ratings and Comments. Till Next Time. May All Your Mechanical Problems be SMALL ONES and May the All Mighty Bless You and Yours. Thanks Again.

Best Wishes and Good Luck

Respectfully

John