Steering Column Repair: Wiper Switch Replacement, turn signal switch, tilt column

Question
I have a 1990 Chevy V1500 Suburban with a tilt column.  While attempting to replace the turn signal lever, I found the wiper switch to be broken internally.  I have already removed the turn signal switch. How do you remove the housing around the wiper switch to gain access to replace the switch?  Are there springs or other elements that will fall out upon removing the housing and if so, how do you know where they came from and how to put them back in?

Thanks in Advance.

Answer
We have recently uploaded some videos on our company website to give you first hand viewing of how to remove, disassemble, and reassemble the tilt column you are talking about. They are broken down into step by step 2-3 minute detailed videos with instructions. Although the videos are for a Chevrolet truck, the column is very similar to yours.

http://www.stolenandrecovered.com/video/index.php

I hope these videos help you.  If not, please contact me again for more information.
Lastly, if you need parts to repair this column simply locate the part and you can purchase it directly through the shopping cart.  We stock just about everything you would need to repair your car properly.
Good luck

Doug

http://www.stolenandrecovered.com