Steering Column Repair: steering column bearings, jeep wrangler, ball bearings

Question
I am in the process of changing the bearings in the tilt wheel of a 93 jeep wrangler for the 2nd time in 3 years. Any input
as to what could cause them to fall apart so fast (plastic retainer breaks and ball bearings fall out).

Answer
Hi Joe:
Sorry about your bearings.  The only things that cause them to break are excessive force (pulling yourself in the truck) applied to the column, or if the retainers and snap ring are not in place allowing free play where there should be a secure bearing race and retainer.

We have recently uploaded some videos on our company website to give you first hand viewing of how to remove, disassemble, and reassemble the loose tilt column you are talking about. They are broken down into step by step 2-3 minute detailed videos with instructions. Although the videos are for a Chevrolet truck, the column is very similar to yours.

http://www.stolenandrecovered.com/video/index.php

I hope these videos help you.  If not, please contact me again for more information.
Lastly, if you need parts to repair this column simply locate the part and you can purchase it directly through the shopping cart.  We stock just about everything you would need to repair your car properly.
Good luck

Doug

http://www.stolenandrecovered.com