If you'd like to install LED auto headlights on your car, you will need to purchase an LED headlamp assembly that is made for your vehicle. If the LED assembly is not produced specifically for the make and model of your vehicle, it may not fit properly. Fortunately, LED headlamp assemblies can be purchased online for practically every vehicle, even older models. Once you have the LED assembly, installing it is the same as installing a regular headlamp assembly.
Turn the engine of your vehicle off. Open the hood and disconnect the battery by using a socket wrench to loosen and remove the negative terminal from the battery post.
Disconnect the electrical connector of your vehicle's headlight assembly by squeezing in the plastic tabs on the connector and pulling it off the assembly. You will now be able to remove the entire headlight assembly. Most assemblies are held in place by bolts or screws, so remove all fasteners using a socket wrench or a Phillips screwdriver as appropriate. Once all are removed, you can easily pull the assembly out of the engine compartment.
Install the replacement LED assembly and refasten the bolts or screws. Reattach the electrical connector. Reconnect the negative terminal to the battery. Test the LED headlights. If they are functioning properly, close the hood. If not, check the connection of the LED headlights and try again. If that does not work, there may be an issue with the assembly or it is not compatible with your vehicle.
