August 2013 - Work Products

Tri-Power Brakes Upgrade the factory two-piston calipers on your '05 to '12 Ford F-250 or F-350 truck with SSBC QuickChange calipers for more stopping power and better looks. Billet aluminum calipers use three stainless steel pistons and bolt to the stock cradle brackets for an easy swap.   |   Ssbc Quickchange Calipers SSBC
888-205-3279 • www.ssbrakes.com Spanner Wrench Want to adjust the ride height on your Fox Racing 2.5-inch coilover shocks with ease? Try the BDS Suspension coilover spanner wrench. This unique tool fits the adjustment collar and accepts any ½-inch drive ratchet or breaker bar. The pin-style design is precision-machined to fit in the Fox adjustment collar holes for the best grip.   |   Bds Suspension Coilover Spanner Wrench BDS Suspension
517-279-2135 • www.bds-suspension.com Regulator Spring Strictly Diesel has released this custom Driven Diesel regulator spring that will run the high-pressure FASS Titanium or Platinum series pumps at 75 psi (these pumps are pre-set to 55 psi for the 7.3L and 6.0L Ford Power Strokes). When using one of these pumps with an aftermarket regulated-return fuel system (or any other method of increasing fuel pressure), there can be pressure drop problems. Using the Driven Diesel 75-psi pressure spring, fuel systems can be run at the more common 60 to 65 psi and still have some “overhead” to maintain pressure when the demand on the fuel rail increases.   |   Strictly Diesel Driven Diesel Regulator Spring Strictly Diesel
623-582-4404 • www.strictlydiesel.com Downpipe The new Mach Force XP 5-inch downpipe exhaust from AFE Power fits '01 to '07 GM diesel trucks with the 6.6L engine. The stainless steel tubing provides maximum flow and increased horsepower while lowering EGT. The system is available in 5-inch turbo-back without a muffler and uses the factory mounting locations for a hassle-free installation.   |   Mach Force Xp 5 Inch Downpipe Exhaust AFE
888-901-7692• www.afepower.com Step Up The BedStep and BedStep3 from Amp Research make it easier for ¾- and 1-ton HD pickup owners to access tools and cargo at the job site. The BedStep mounts under the rear bumper to provide a solid platform. The BedStep2 mounts underneath either side of the truck bed, behind the cab, allowing the owner to reach cargo or fifth-wheel trailer hitches. High-strength die-cast aluminum alloy is coated with Teflon, powdercoated, and anodized. Both steps hide away until you deploy them with your foot.   |   Amp Research Bedstep Amp Research
800-309-6823 • www.amp-research.com Slide & Go Platform Looking for a sturdy platform? Bustin, a division of R.O.M. Corp., has brought this step system to market that is perfect for flatbed trailers, recreational vehicles, and vocational trucks. The Slide & Go measures 28 inches deep by 36 inches wide. Height varies from 8 inches for the platform only, to 19 inches when using Bustin's retractable Slide-Away step.   |   Bustin Step System Bustin
816-510-2956 • www.romcorp.com Show-Quality Pipe This polished 6061 aluminum 3-inch driver-side Power Stroke intercooler pipe from MBRP looks great, but it's also built to last. Mandrel-bent tubing provides a 45 percent increase in flow compared to the factory part, which leads to improved performance, faster turbo spool, and lower EGT. The heavy-duty four-ply couplings and spring-loaded constant-tension clamps prevent leaks and blown boots.   |   Mbrp Power Stroke Intercooler Pipe MBRP
888-636-7223 • www.mbrp.com Quick Disconnect Smittybilt has debuted its new quick-disconnect D-rings for serious off-roaders. These heavy-duty, forged D-rings have a quick-pin disconnect and are available in 3/4-inch or 7⁄8-inch sizes, in either a bright zinc finish or black powdercoat. Mount them on your bumper, and they are out of the way until needed.   |   Smittybilt Quick Disconnect D Rings Smittybilt
888-717-5797 • www.smittybilt.com