Car Alarms: what is a shock sensor an how do i fix it, valet mode, shock sensor

Question
i bought this honda accord and for some reason it wouldnt start but i had power tell i tryed to start after i started to explore the problem i found a beeping an blinking box if this is an alarm i had no idea about it an how do i fix the problem

Answer
A shock sensor measure vibration and triggers
an alarm. If that box you found is the shock sensor,
unplug it. Then if the vehicle also has starter kill,
to try to disarm it, look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE
( if this is a remote starter, the antenna on the
front window glass may also have the over ride
button inset into it.)

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM