Car Alarms: Hellfire Alarm System Ignition Kill, valet mode, dash area

Question
We purchased a used 1997 Dodge Dakota with a Hellfire alarm system in it and has ignition kill. My fiance just called and he can not get the alarm to shut off with the remote(the red light is coming on on the remote) he disabled the horn so he could work on it. Says the actually tapped into the wiring system to install. Any ideas on how he can bypass this to get home so we can have someone look at it?

Answer
Ok, an installer would place the velet switch in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.

The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM