Car Alarms: LOST ALARM PAD, valet mode, 626 mazda

Question
I LOST BOTH OF MY ALARM PAD FOR MY 2001 626 MAZDA AND  NOW I AM TRYING TO FIND THE KILL SWITCH TO DEACTIVATED THE ALARM? CAN YOU TELL ME WHERE IS THE KILL SWITCH ON MY CAR.SO NOW WHEN I OPEN MY DOOR MY ALARM WILL GO ON AND I NEED TO INSERT MY KEY INTO THE IGNITION SO ALARM WILL SHUT OFF.

Answer
Ok, an installer would place the velet switch in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.

The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM