Car Alarms: car alarm kill switch, valet mode, little spring

Question
I have an old alarm that hasn't worked in years. In fact I don't even have the remotes any more. I just put a new battery in the car and forgot how to override the the kill switch.To top it off my wife has to be to work in the morning.I need help.

Answer
To try to disarm it,
turn on the ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM