Car Alarms: Factory 1996 Infinity G20, infinity g20, car horn

Question
I have lost the key to turn the alarm off. I had to pull the fuse. Now I have no radio and air bags. How do I permanently disarm the alarm so I can put the fuse back in. The car is very old and really doesn't need an alarm.

Answer
Ok, if the OEM alarm is malfunctioning now,
(car horn blarring and head lights flashing)
odds are, it will again.

Get out some basic install tools or get
a friend or a good technician
in there to do this.

Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
green/yellow |-| at the
theft warnIing module. The
Theft Warning Module located under
dash right of the steering column.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the OEM alarm functions entirely.

Good luck.

ALARMTEK
CARALARMMAN.COM