Car Alarms: I need to disconnect my car alarm, dash area, acura integra

Question
I have a 93 Acura Integra that I bought a year ago.  The battery for the remote entry went dead and now every time I unlock the door with the key the alarm goes off.  The alarm does not make any noise it just makes the lights blink.  Even after I lock the doors manually and shut the doors the alarms continues to go off with just the lights blinking.  The battery keeps going dead and I'm assuming this is why.  Everytime I attach jumpper cables the car starts straight away without even having to turn the other car on.  I just want to disconnect the alarm completely as it is not needed.  I have no idea how to do this, please help!

Answer
Ok, try this.
   Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area in most cases,
until the installed LED (the blinking light)
in your dash area comes on solid.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.
If you still want to remove it at this point,
take it to your neighborhood installer
for this, or buy the wiring chart for
the Acura, and reverse engineer it wire
by wire, until it's safely removed.

Let me know what happens.

ALARMTEK
KEYLESSCAR.com