Car Alarms: viper car alarm, viper car alarm, customer support services

Question
I need to uninstall my viper car alarm from my 90 mustang to my 98 grand prix se. Please give me detailed instructions... I do not want to mess this up.  the alarm was not set up to start my engine or anything like that. just basic for the door locks... and securing the car.

thx so much

Answer
You will need to study a bit at
www.mrinstall.com to se what to expect.
Then get these vehicles Wire Color/Location/Polarity
Data Charts so you can reverse engineer it from
one car and install it into the other.

As far as the manufacturers install manual however,
that would need to come from them.

CLICK ON or, COPY/CUT N PASTE THE FOLLOWING
PAY LINK TO GET IT NOW:

https://www.paypal.com/xclick/business=installsupport%40aol.com&item_name=2+VEHICLE+WIRING+DATA+CHARTS&item_number=2+VEHICLE+WIRING+DATA+CHARTS&amount=7.98&no_note=1¤cy_code=USD

OR,

You Can Go Back To www.WIRINGCHARTS.com ,
And Send Us $7.98 To Aquire Them.

As soon as I receive your payment,
I will forward your 2 Vehicle Specific wiring
charts to your email address with all of the
colors, locations & polarities,  plus
many helpfull and applicable links for
relay diagrams, & more to complete your
Car Alarm, Keyless Entry
de-install and re-installation projects.

It will really kake the installation alot
easier with a guide to follow.

Regards.

Robert Martin
Customer Support Services
The WIREWERX!
www.WIRINGCHARTS.com