GMC Repair: 98 gmc sierra 1500 cut out, gmc sierra, firt time

Question
on a couple occasions while turning left my truck has cut-out. once it stopped completly the other time it hesitated and picked up again. the firt time it started up right after
also i have a p0102 code that i can't figure out. I have cleaned and changed the MAS sensor but it keeps coming back after three or four start cycles

Answer
Hi
I would check the wiring for the MAF sensor, if you have repalced the sensor already.
Wiggle the harness while vehicle is running, and see if you can induce the fault.
If you have access to a scan tool, you can also watch the data. Check the connector. the pins and terminals, make sure none are spread out to much.
If problem persists, I would take it to your local mechanic and have them check it.
Just advise from experience.
Hope this helps.
Good Luck
Paul