Audi Repair: directional switch, high beams, steering wheel

Question
Yea, when I push the lever out or in to put the high beams on and turn signal right it would work.  Is it ground?

Answer
Nope it's a loose connection.  You have to take the steering wheel off, take the indicator levers off and remove the metal ring that hold them together.  The two halves can seperate (might be a screw holding things together) and when they are separated bend the copper reveiver connectors together a little bit to ensure that the connections are firm when reassembled.  This should fix your problem.  Let me know,  Jan