Question-------------------------
Followup To
Question -
Hello Mark! My son's s-10's clutch went out, he and his friend did the work. all new parts ,including slave cylinder ,master cylinder,bled system, the problem is ,the clutch worked fine for about a hour then no clutch. Help! Thank you Gene w
Answer -
Hello Gene, What happened to the clutch....won't release, pedal goes to floor with no pressure. Can you start the truck in gear and it will move? let me know
Have a Great New Year Mark Mark ,the truck can be started in gear with clutch depressed, and feels normal,and will go forward or reverse but if you depress the petal to change into a different gear it doesn't go into gear,any gear ,feels like clutch needs to go down farther. if you shut the engine off it will easily go into any gear. Thanks gene
AnswerHi Gene, Well either there is air in the clutch line or a problem problem with the master/slave assembly. Try this...push the clutch pedal to the floor (engine off) and side step the pedal letting it fly up from the floor. Do this around 20 times and see it the pedal gets better. If there is air in the system this will bleed it up to the top. Let me know what happens
