Chrysler Repair: chrysler voyager trans problem, chrysler voyager, switch circuit

Question
Hi Roland its regarding the voyager with Trans in limp mod
I have the car  scanned the results was these codes :  54 + 36+ 53+ 24+74 . plus I ve noticed that mileage on car doesn't read right example i went for a trip around 40 km and it counted  only 3.1 km on the clock .
thank you for your help

Answer
Hi Musa,
The 24 code says there is an issue with the low/reverse pressure switch circuit, and the 36 code says that the fault codes were observed shortly after a shift. The unfortunate negative diagnostic codes are 53 and 54 which say the there is clutches slipping in 3rd and 4th gears. The diagnostic table in the manual says these two mean that there is a problem inside the transmission that would require it to be removed and opened up for repair. I don't see a code 74 so I can't comment on that. The distance sensor may be at fault or the odometer gears in the cluster may be bad, but neither of these is relevant sufficiently to modify the diagnosis.
So it appears to me that there is not much reason to try to correct the 24 code, and that the trans needs to be rebuilt.
Roland