Chrysler Repair: change headlight bulb on 2002 sebring, negative cable, wiring harness

Question
I have a 2002 sebring convertible. I need to replace the bulb in the driverside headlight. I removed the 2 bolts and the light is loose but I can not remove the housing to get at the back to remove the bulb

Answer
REMOVAL
Disconnect and isolate the battery negative cable.
Remove the two retaining screws.
Remove upper fascia retainers by prying under the head of the fasteners with a flat bladed tool.
Remove headlamp unit from fender side first, then pull headlamp unit out (Headlamp Unit).
Disconnect the wiring harness from the bulbs.
Remove the headlamp unit.