QuestionQUESTION: My service engine came on and I got to scan the errors and it found p0605 and p0700. Could this be a sensor gone bad or what can I do to fix it?
ANSWER: the 605 is an internal Tranny computer failure U will need a tranny computer no way around it. It will also need to be programed as well once installed.
If u live near Atlanta I would help u out with this.
---------- FOLLOW-UP ----------
QUESTION: Wish I live close to you, I live in South Texas. I took it to a tranny shop and he checked everything and said it was possible that it would be the TCM, but he had to make sure it was no wires messed up. But more than likely it would be the TCM. If its the TCM do I have to get a brand new one or would a used one be ok? I know it would have to be reprogramed, but would a used one work just as good? Thanks again so much....
AnswerSymptom:
P0605-INTERNAL TCM
POSSIBLE CAUSES
TCM - INTERNAL ERROR
TEST ACTION APPLICABILITY
1 If there are no possible causes remaining, view repair. All
Repair
Replace the Transmission Control Module. WITH THE DRBIIIt
PERFORM QUICK LEARN AND REPROGRAM PINION FACTOR.
Perform 41TE TRANSMISSION VERIFICATION TEST - VER
give that to them thats right from Chrysler.
If u get a used one it might not be able to be programed I have not installed a used one it would be cheaper but I really don't know about the program part sorry.
