Dodge Repair: 2005 Dodge Caravan Rear bumper removal and repair, fascia brackets, 2005 dodge caravan

Question
We have a dent in the corner of our rear bumper. It isn't painted, so we don't have to worry about that, but I want the dent gone! I believe we have to remove the bumper to do this. How do we remove the bumper? And are there any tricks/tips to "working out" the dent? I really don't want to go pay someone to do something that seems easy enough. Thanks!

Answer
REMOVAL
Open liftgate.
Remove attaching screw from upper fascia to the liftgate tower, right side and left side.
Hoist and support vehicle with safety stands.
Disconnect rear park assist wire connector (PARK ASSIST WIRE CONNECTOR), if equipped.
Remove the three screws attaching rear fascia to rear fascia brackets on right side and left side (REAR BUMPER FASCIA) and (REAR FASCIA WITH PARK ASSIST SENSOR).
Remove the four plastic push pin attaching bottom of rear fascia to fascia support.
Remove rear fascia from vehicle by lifting sides of fascia up and outboard to release from rear fascia brackets.
Remove park assist sensor (PARK ASSIST SENSOR), if necessary. (Refer to 8 - ELECTRICAL/CHIME/BUZZER/PARK ASSIST SENSOR - INSTALLATI