Dodge Repair: code p0320, crankshaft position sensor, crank sensor

Question
I have a 03 dodge truck 3.7. I get code 0320 I replaced the crank sensor and still the same prob. When the engine is cold runs fine. It gets hot it stops running and my tack will jump all over the place.I have checked all the wiring connections to the sensor computer and distribution box under the hood. Any suggestions. Thanks

Answer
POSSIBLE CAUSES
CAM POSITION SENSOR SIGNAL
INTERMITTENT CRANK POSITION SIGNAL
(K7) 5-VOLT SUPPLY CIRCUIT SHORTED TO VOLTAGE
(K7) 5-VOLT SUPPLY CIRCUIT OPEN
(K7) 5-VOLT SUPPLY CIRCUIT SHORTED TO GROUND
(K24) CKP SENSOR SIGNAL CIRCUIT SHORTED TO VOLTAGE
(K24) CKP SENSOR SIGNAL CIRCUIT OPEN
(K24) CKP SENSOR SIGNAL CIRCUIT SHORTED TO GROUND
(K24) CKP SENSOR SIGNAL SHORTED TO (K7) 5-VOLT SUPPLY CIRCUIT
(K4) SENSOR GROUND CIRCUIT OPEN
CRANKSHAFT POSITION SENSOR
PCM