Ford Repair: fuel injectors will not spray fuel, fuel pump filter, noid light

Question
i have a 87 bronco with 302. fuel system has presure,computer is sending signal to fuel injectors(new fuel injectors) but they will not spray. i have replaced everything i can think of, computer, control module,fuel pump filter, presure regulator. i am at a loss,any help?


Answer
Hello and thanks for the question...I'll try to help.
 What you are saying doesn't make sense. If everything is in order and correct, it should work.
I would recheck a few things.
1 Check your fuel pressure. I've always used 41psi running as a standard. It will hike up to 60psi when running and the regulator is unplugged.
2 You might want to try and crimp off the return line, to see if the regulator is good or bad.......NEW does NOT mean good.
3 Check for a signal from the computer......use a noid light. You should be able to get one for a Ford at your local parts store.
Hope this helps,
Erik