Mitsubishi Repair: 92 Galant GSR Manual problem in shifting the 1st gear, slave cylinders, master and slave

Question
when i shift into the 1st gear, there is sound and hard to shift in it. however, i can shift into the 1st gear after shift into the 2nd gear or just before the car stop. The master and slave clutch cylinders, clutch kit are new. What happen to the car? What can i do?
Thanks very much for answering this question.

Answer
Thomas: Sometimes it take a bit of the clutch to reseat it's self after it has been worked on. So that might be your trouble. When you replaced the master and slave cylinders did you bleed all the air out of the system? That is a must to do that. So maybe that is the problem. Other wise you might have to get your car to a shop so they can see what the problem might be. Hope this helps and good luck!