Pontiac Repair: GM tilt steering column 1974 F-body car, pivot pins, pivot pin

Question
Is it necessary to remove the bearing housing pivot pins to disassemble the entire column? If so, what's the trick?

Answer
Hi Mike:

It depends on what your trying to replace/how low into the colum you want to go but yes to go lower in the column you need to remove the pivot pins. There is a tool called a pivot pin remover this is it. http://cgi.ebay.com/LISLE-STEERING-WHEEL-PIVOT-PIN-REMOVER-NO-19940-USA-/3603334...

Good luck :)