QuestionThanks for your time Ben,
Recently acquired tiller, no history on it.
Model 130202, type 0198-04, code 81090219 Parmi master till
No spark, I pulled off the rope cover and assume it is solid state with what I saw. Saw no points, condenser,coil.
Can I assume it is a 1981? How much oil does it take, what type of oil after I clean the filter to use on it, where can I find a diagram of the tiller, where can one order parts if ever needed? I went looking to lots of questions and booked marked some.
Thank you
Russell in AZ
Answer
130202-0198-04
Russell
The model number and type number i could not find this is the closest
130202-0198-04.This motor is for snowblower. Recheck the numbers again.
The oil can be 30W the you said you want to clean the filter are you talking about the oil filter,you can't clean them they are meant to be discarded.Usually the engines take around 18-20 ounces. Any Briggs Dealer an get you the parts. We are a serving dealer for Briggs.We can get you parts our web site is www.gbelect.net As far as the tiller there should be a model number on the frame the numbers you gave me were for the engine.Here is a diagram of this engine.
