Small Engines (Lawn Mowers, etc.): walbro wt281 carb, question pool, exhaust port

Question
this carb has been rebuilt by a local small engine shop but it still wont work it would try to start but die immediately i checked the metering lever it appeared to be set low if set any higher it runs but poorly seems to be flooding any suggestions

Answer
Hello Cleatus:

>>Sorry for the Delay. This Question was Located in the Question Pool. I am Also on Vacation and I had a Few Minutes to Answer Questions.
>>Has the Exhaust Port and Muffler been Checked for Carbon Blockage? If Not, then
>>The Following is a Basic Instruction File for Doing a Diagnostic on the Engine for this Problem. Any Input is Appreciated.
>>**Remove the Muffler and Make Sure the Exhaust Port is Clear.
>>If it is, then Try to Start the engine with the Muffler Off.
>>If it Starts and Runs Properly, then Clean the Spark Arrestor Screen in the Muffler or Replace the Muffler if Required.
>>Please, Do Not Hesitate, If  I Missed Something or you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance.
Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Be Happy. Thanks.


Good Luck


Respectfully


jbridger (John)