Small Engines (Lawn Mowers, etc.): blade adaptor removal, craftsman model, self propelled mower

Question
I have a craftsman model number 917-378070 22" self propelled mower. I need to change the v-belt. I am trying to remove the blade adaptor. This thing is "stuck". I have sprayed with Blaster PB and attached a wheel puller to it, with no luck. I don't see any pins or screws. Whats your suggestion?

Answer
Hello Wayne:

>>From your Description it Sounds like you are Going to have to Apply Heat to the Blade Adapter while Pressure is Applied to the Adapter with the Wheel Puller.
>>When Attaching the Blade Adapter to the Crankshaft; be Sure to Use Never Seize on the Crankshaft. This will Prevent the Problem you are having in the Future when the Blade Adapter has to be Removed.
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John