Chrysler's production of the Sebring sedan, coupe and convertible models started in 1995. Some models of the Sebring included fog lights built into the lower front bumper. The fog light bulbs are not easily accessible from under the bumper due to the low ground clearance of the Sebring. Instead, you can access them from behind the wheel well to change them at home if a bulb fails. Buy PSX24W bulbs from an auto parts specialty store or Chrysler dealer.
Park the Sebring in a flat area. Turn the steering wheel toward the driver's side to access the passenger side bulb, or toward the passenger side to change the driver's side bulb.
Locate the two pins securing the inner fender liner's access panel. Pull the center of the pin straight back to remove it. Pull the cover off the access panel.
Reach through the open panel and grasp the fog light bulb. Turn the bulb counterclockwise and pull it straight back out of the assembly.
Pull the bulb straight out of the socket. Insert the new bulb into the socket, pushing it firmly into place. Insert the bulb into the fog light assembly and turn it clockwise to lock it in place.
Replace the access panel cover and push the retaining pins into place. Turn the wheel so that it faces the opposite direction to repeat the process on the other bulb.
