QuestionHi,
I have read any messages in chat about one immobilized system in cars, you can solve these problems. I have one problem with a Rockwell 04671346 in a Jeep Wrangler Sports 2.5 1996, that controls the start of engine, and the remote control was stolen; so that , I can´t start the engine.
Can you help me about how can I bypass the Rockwell or start the engine....Please, I´m very depressed, Chrysler answered me without solution, or the unique one was leaving the car and it is my unique transport way to my job.
Thank you for you suggestions to solve it.
Dolores Fuertes,
Aguilas, Spain.
Answer
Remove Starter Kill
OK. have a look at the attached picture.
Locate the brain box for the Rokwell under the
drivers side dash board. Un plug the harnesses
attached to it and remove. Then
locate the starter wire in the IGNITION SWITCH
harness that shows 12 volts ONLY WHEN CRANKING.
This is your starter wire, and the picture
I attached will solve the problem and have
you happy again. :>)
Aceptar. echar un vistazo a la imagen adjunta.
Busque el cuadro de cerebro para el Rokwell en el marco del
conductores guión bordo lado. Un enchufe de los arneses
unido a él y eliminar. Entonces
localizar el cable de arranque en el interruptor de encendido
aprovechar esa muestra de 12 voltios SÓLO CUANDO ARRANQUE.
Esta es su cable de arranque, y la imagen de
I adjunto va a resolver el problema y han
feliz de nuevo. :>)
Good luck!
ALARMTEK
www.CARPROTECTOR.com
