Car Stereos: audio installation, power antenna, orange stripe

Question
hi im installing a stereo into my 1998 mazda protege , i need a wire diagram , i know which wires go to the back speakers but dont know the rest.

Answer
Hi Derek.

A +12 Volt Ignition Wire Blue w/ Black Stripe Red
B +12 Volt Battery Wire Blue w/ Red Stripe Yellow
C Do Not Use
D Do Not Use
E Power Antenna Turn On not available Blue
F Do Not Use
G Do Not Use
H Do Not Use
I Left Front Speaker (+) Purple White
J Right Front Speaker (+) Orange Gray
K Left Front Speaker (-) Blue w/ Orange Stripe White w/ Black Stripe
L Right Front Speaker (-) White Gray w/ Black Stripe
M Left Rear Speaker (+) White w/ Blue Stripe Green
N Do Not Use
O Left Rear Speaker (-) Black w/ Blue Stripe Green w/ Black Stripe
P
Q Right Rear Speaker (+) Blue w/ White Stripe Purple
R Right Rear Speaker (-) Blue Purple w/ Black Stripe
S Do Not Use
T Do Not Use

TIP:Crimp a male tab spade to the new radios
ground wire. Slide it into the brown female
tab spade connector that originally snapped
into the tab on the rear of the factory radio.