QuestionQUESTION: Will you please just tell me where the thermostat is located? My original question. I would really appreciate it because my LAST thread of questions finally ran out and you still haven't answered the question. WHere exactly is the thermostat located?
ANSWER: what engine size do u have?
---------- FOLLOW-UP ----------
QUESTION: I gave u all that info in the previous 4 emails. It's a 2.7L v6 concorde. I also told u why I want to change it. Please just tell me location of thermo.
AnswerREMOVAL
Disconnect negative cable from remote jumper terminal.
WARNING: DO NOT REMOVE PRESSURE CAP WITH THE SYSTEM HOT AND UNDER PRESSURE BECAUSE SERIOUS BURNS FROM COOLANT CAN OCCUR.
Drain cooling system (Refer to 7 - COOLING - STANDARD PROCEDURE).
Remove the engine oil dipstick and tube. To prevent coolant from entering engine, cover the dipstick tube opening in crankcase with a suitable plug.
Raise vehicle on hoist.
Support the engine and remove the left engine mount (Refer to 9 - ENGINE/ENGINE MOUNTING/LEFT MOUNT - REMOVAL).
Remove generator support strut.
Disconnect generator electrical connector.
Remove the transaxle dipstick tube bracket attaching bolt.
Remove the lower heater hose tube bracket bolt.
Remove the lower heater hose from thermostat housing.
Remove radiator lower hose from thermostat housing.
Remove thermostat housing bolts (Thermostat and Housing - 2.7L).
Remove thermostat and housing.
