Chrysler Repair: 1999 Concorde map light change, 1999 chrysler concorde, chrysler concorde

Question
How do I pull off and change the front overhead map lights on the 1999 Chrysler Concorde

Answer
Hi Greg,
Either remove the - post remote battery attachment from the strut tower under the hood or remove fuse #19 from behind the dash (remove left end cap of dash after opening driver door to access fuses).
I assume these lamps are mounted in one of the two types of overhead consoles. Those consoles are removed by removing the screw (if there is one on your console type) on the windshield side of the console. Then grasp the outer edges of the console and pull straight down to release the clips at the rear of the console that hold it in place. If there was a screw then instead grasp the front of the console and pull straight down. If pulling down on the front doesn't release it then pull dowh on both sides. The map bulbs are then accessible after you disconnect the wiring and remove the unit entirely. I believe the bulb is a #192.