Small Engines (Lawn Mowers, etc.): Kohler 23hp engine will not turn over, craftsman lawn mower, jumper wire

Question
I have a 23hp Kohler engine on my Craftsman lawn mower and it will not turn over at all.  I have checked the battery and it is still good.  I get a clicking sound occasionally when turning the key, but that's it.  Any suggestions as to what the problem may be?

Answer
Hello Nate:

Use your Jumper Cable Set and Attach the Positive Lead Onto the Positive Post of the Battery. Now Firmly Touch the Large Post on the Starter. If the Starter Turns the Engine Properly, Then Check the Solenoid. Firmly Touch the Small Post at the Base of the Solenoid. If The Starter Does Not Turn and the Solenoid Clicks, Then the Solenoid is Bad. If the Starter Turns, then Check the Safety Switches. PLEASE REMEMBER THAT THE INSTRUCTIONS FOR CHECKING THE SAFETY SWITCHES IS JUST THAT!!! FOR CHECKING ONLY. I NEVER Suggest a Mower be Operated with a Safety Device or Switch Disconnected or Bypassed. Now. On Some Model Mowers you can Simply Unplug the Safety Switch from the Harness. On Other Models you have to Place a Jumper Wire Between the Harness Terminals. Check the Clutch/Break and the Blade/PTO Safety Switches First. Check the Seat Safety Last. Usually the Seat Safety is Not in the System for Starting the Engine. Just to Ensure Someone is in the Seat when Engaging the Transaxle and/or Blades. Send me the Model Numbers Off the Mower, Please. With these I can Locate the Proper Manual and Better Assist you. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting you Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John