QuestionI had the special tool to remove those pins in the column unfortunately in the second pin it did break is it possible to drill that broken tip off and maybe still get it removed I am having to replace the ignition switch on a gmc sonoma (93)
AnswerHello Jacquie:
I'm sorry about your pivot pin tool. When they break off inside the pin, the only way I know to get them out is to very delicately chisel them out by un-threading them. The pin and tool are both harder than most drills , so you will never be able to get a straight hole drilled that small into such hard metal.
With all that said, why are you removing the pins to change the ignition switch? the switch is nowhere near there.
We have recently uploaded some videos on our company website to give you first hand viewing of how to remove, disassemble, and reassemble the tilt column you are talking about. They are broken down into step by step 2-3 minute detailed videos with instructions. Although the videos are for a Chevrolet truck, the column is very similar to yours.
http://www.stolenandrecovered.com/video/index.php
I hope these videos help you. If not, please contact me again for more information.
Lastly, if you need parts to repair this column simply locate the part and you can purchase it directly through the shopping cart. We stock just about everything you would need to repair your car properly.
Good luck
Doug
http://www.stolenandrecovered.com
