Steering Column Repair: steering repair, steering column repair, pivot pins

Question
QUESTION: What is the name of the housing surrounding the ignition switch? OR the thing the ignition switch slides into.

ANSWER: Hi Aaron:
The part you are talking about is called many different things depending on what vehicle you have.  Please tell me the year, make & model & I can help you further

Thanks
Doug

---------- FOLLOW-UP ----------

QUESTION: It is A Ford mustang, "96".


Ford housing   ANSWER: The name of the part you are asking about is a "steering actuator housing". The part # is F6DZ 3511 A

I am enclosing a picture to make sure we are talking about the same part.

Thanks
Doug


---------- FOLLOW-UP ----------

QUESTION: Do you know where to find it.

Answer

most of the parts you   Aaron:
My company sells these parts over the internet and through our website all day long..... http://www.stolenandrecovered.com

I'd be glad to ship one off to you.  If you need to replace it, you will also need to replace the two bearings that go inside it.  The housing does not come assembled so you will also need to swap over some pivot pins and arms for the tilt lever to work properly.  

If you contact me through the website http://www.stolenandrecovered.com/contact.php
I can email you all the photos and some instructions you will need, rather than doing this one frame at a time.

The housing will cost you $86.20, the bearings are about $9.00 each, so with shipping you will probably be looking at about $125 when you are all finished

My direct email is dgan@stolenandrecovdered.com

We'll talk if you include a phone # to reach you back at.

Later...

Doug