Dodge: LIGHTS, running board, interior light

Question
WHERE CAN I CONNECT RUNNING BOARD LIGHTS ON A 2003 DURANGO, SO THEY COME ON WHEN ANY DOOR IS OPENED, AND GO OFF WHEN CLOSED

Answer
To make the lights come on and go off with the doors being opened and closed the wire will have to be tied into the inside light wire.You will have to track where to tie in at.I know the little button on the inside of each door is a good place to start!Just don't know where an out of site place would be.If you open a door and push the button in the interior light will go off.Probably could use the front drivers door and the passenger side front door,and could also wire them seperate to keep from having to run an excessive amount of wire.If you need more detailed info.email me back.Just wanted to make sure this was explained clearly.